■Features
●Comply with theInternational Electrotechnical Institute IEC61496-1/2 standard of category 2safety level, that is, belongs to the self-detection, fault shutdown.
●Ultra-compactdesign, compact structure, beautiful appearance, size of only 25mm × 28mm, canbe installed in a narrow environment, effectively reducing the installationspace.
●Protective heightranges from 60mm to 1320mm, and the number of optical axes ranges from 4 to 32,which can be selected according to the monitoring range of the device in use.
●High-resolutiondesign with a minimum optical axis distance of only 10mm, which can reliablyprotect human fingers.
●Waterproofsealing structure design, can be used in humid working environment.
●Electromagneticcompatibility design, strong anti-interference ability, can be used reliably inhigh-frequency and high-magnetism environments such as frequency converters andservo motors.
●Professionaloptical system design, strong anti-external light interference ability.
● NPN or PNP dualoutput can be connected to the safety light curtain controller, safety relay,can also be directly connected to the PLC, PC or external relay, at this timeshould ensure that the subsequent control circuit of the equipment is safe andreliable.
● High reactionspeed, response time of only 3-15ms.
Parameters and model | GAE10series | GAE20series | GAE30series | GAE40series | |
Number of optical axes | 8、12to32 | 4、6、8to32 | 4、6、8to32 | 4、6、8to32 | |
Beam pitch | 10mm | 20mm | 30mm | 40mm | |
Minimum protected object | φ15mm | φ25mm | φ35mm | φ45mm | |
Protection height | Beam pitch ×(number of optical axes-1) | ||||
Protective range | 0-2m | ||||
Power supply voltage | DC24V | ||||
Power consumption | <8W | ||||
Response time | 3-32ms | ||||
Output | NPN | NPN transistor output, 100mA | |||
PNP | PNP transistor output, 100mA | ||||
Output current | 100mA | ||||
Output form | NPN or PNP dual output, NPN/PNP single output at the same time | ||||
Output status | ON when all optical axes are illuminated. | ||||
Indicator light | Transmitter | Yellow light on, power on | |||
Receiver | Dual-color red and green indicators, unshaded (green), shaded (red) | ||||
Light-resistant environment | Sunlight: 10,000 Lx, white woven light: 3000 Lx | ||||
Ambient Temperature | -25-+70°Celsius (note no condensation, freezing) | ||||
Ambient Humidity | 35-95%RH | ||||
Anti-vibration | Frequency: 10-55Hz, Amplitude: 0.75mm, 2 hours in each direction of X, Y, Z | ||||
Anti-impact | Acceleration 300m/s, 2 hours in each direction X, Y, Z | ||||
Insulation resistance | AC1000V,50/60Hz,1minute | ||||
Dielectric strength | DC500V,20MΩ | ||||
Connection method | Equipped with special cable, 4 cores for emitter, 6 cores for receiver | ||||
Shell material | Protective housing: Aluminum alloy End cap: ABS engineering plastic Bracket: Cold rolled steel plate | ||||
Protective structure | Standard type:IEC IP65 |